3-axis delta robot | working diameter 1,000 mm

Prosimy wybrać kraj dostawy

Wybór kraju/regionu może mieć wpływ na różne czynniki, takie jak cena, opcje wysyłki i dostępność produktów.

Wysyłka w ciągu 24 godzin Obliczanie żywotności Dołącz do newslettera i bądź na bieżąco! Umów spotkanie z ekspertem

myigus

Koszyk zakupów

(0)

Moja osoba do kontaktu

igus® Sp. z o.o.

ul. Działkowa 121C

02-234 Warszawa

+48 22 863 57 70

+48 22 863 61 69

Wyślij wiadomość

Zobacz wszystkie osoby do kontaktu

PL(PL)

3-axis delta robot | working diameter 1,000 mm | Size: XXL

Product information

Up to 96 picks / min.
For loads up to 2.5 kg
For precision requirements up to approx. 0.3 mm
For speeds up to max. 2.0 m/s
Max. Acceleration: 28 m/s²

Opis produktu

Delta robot - 3 degrees of freedom 1000 mm
igus offers Delta robots for a wide variety of tasks. The 3-axis Delta LCA-DR1000-03 was specially developed for fast pick & place tasks and is optionally available with a suitable controller. With a reach of 1,000 mm and a pick rate of 96 picks/minute, it sets new standards for cost-effective automation. The combination of precision and speed makes this robot ideal for end-of-line applications.

Application examples
Typical applications for our drylin® delta robots are pick and place, conveyor belt picking and stacking tasks in three-dimensional space. In combination with a gripper or suction cup, picking tasks can be implemented very quickly.

Control system
The Software enables simple and intuitive robot control and programming, making it easy to get started with automation. The modular design makes it possible to control different igus kinematics, for example Delta robots. The Delta robot can be controlled directly by our igus® Robot Control with all its advantages.
The free and license-free igus Robot Control software is integrated into the control system and thus uses a uniform operating concept and consistent communication services for many components of a system. This means less project planning effort and faster commissioning.
The igus Robot Control is not part of the article and can be obtained from us as an option. A master controller is not necessary.

If you want to use your own (robot) controller, this is also no problem.
Alternatively, it is also possible to operate each axis individually with a controller. For example with our igus® dryve D1 motor controller. With this control architecture, you need one motor controller per linear axis or motor and an additional master controller, which controls the coordination of the movement. You must then program the inverse kinematics for the delta robot yourself in your development environment.
The motor controllers are not part of the article and can be obtained from us as an option. A master controller is not currently offered by igus.